Monthly Archives: May 2017

New Manufactured Home Foundation Essentials – 2 Must Have Upgrades

When purchasing and installing a new Manufactured Home, there are two upgrades that are recommended. They are installing a Vapor Barrier and Earthquake Bracing. Each is explained here:

Mobile Home Vapor Barrier

A Vapor Barrier for a Mobile or Manufactured home is a sheet of thick, rubbery plastic that goes directly over the dirt under a Mobile or Manufactured home. The foundation piers then rest on top of this barrier.

You really need to make sure a home you buy or have installed has this protection. Mobile and Manufactured homes need dry ventilation underneath. This barrier will prevent any moisture from damaging the home – especially rotting of the floors, but also helping with fungus, mold, and termites.

Making sure that a vapor barrier is installed before you buy a Mobile or Manufactured home is absolutely necessary. And the additional cost is very minimal considering the amount of protection you gain.

If you are buying a mobile or manufactured home that is already on a space, but with no vapor barrier, then you can hire a contractor to install a vapor barrier under the home. They will just have to cut pieces that will go around the pier-and-post foundation and all piping in place. This is not ideal, but way better than no barrier at all.

Mobile Home Earthquake Bracing

Earthquake bracing is recommended in California, and elsewhere earthquakes are common. Mobile Homes and Manufactured Homes are especially susceptible to damage in a earthquake due to their foundation system (most of the time they are installed on a pier-and-post system).

Earthquake bracing is a simple upgrade that can increase the value of your home by at least the cost of installation of the bracing. This cost is running from $ 2000 to $ 4500 in California right now. The actual brace is like a shock absorber in a car, but installed at an angle from the steel I-beam on the bottom of the home, and anchored to the ground. This brace will keep the home from shifting off the pier-and-post foundation.

Insurance companies may insist on having earthquake bracing installed if you want to purchase earthquake insurance on your Mobile Home or Manufactured Home.

Earthquake bracing can also help a Mobile Home not come off the foundation in high winds, although it is not designed to do this and should not be relied on for this.

Further explanation and Pictures on upgrades both of these, color : as well color : as a whole bunch of <br> free information, tips, advice, and Recommendations can be found at: Http://www.free-mobile-home-info.com

The 5 Essential Financial Reports You Should Be Asking For in Your Business

A question I often get asked from my business owner clients is "what reports should I be asking for so that I can keep my finger on the pulse on my business".

Now this does differ slightly from business to business. For example, if you are a retail shop, then you're going to automatically have daily figures available to you as part of your normal process. However most businesses should be asking for weekly, monthly and quarterly reports.

WHY I NEED TO READ REPORTS!
Before I go through the reports in detail, I know that a lot of people do not like looking at the figures in their business. And usually this is because they do not know what it is that they're looking for. So usually then their accountant or bookkeeper (or receptionist!) Gives them a monthly report, they glance at while holding their breath, and then either breathe a sigh of relief if it shows a profit, or they grimace and swear when it shows a loss . But usually by the time they've got this report, it's already too late. The financial status of your business should be at the forefront of your mind every day- not something that you look at once or twice a year when you run out of cash.

REPORT FREQUENCY
The first thing to decide is how frequently you need to see reports. I suggest a minimum of monthly, if not weekly. This can sometimes depend on whether you have a full time accounts person, or whether they only come in once a month.

TOP TIP: DO A YEAR END EACH MONTH
To help you know what's going on in your business, one of the first things to implement into your business is a culture of having a year end every month. By that I mean … you want to ensure that every revenue figure and expense if recorded according to the month that it's incurred. If you insist on this type of culture, you will start to receive accurate figures. So think end of year each month and close off all financial data for each month. That way you know that your reports fully reflect the state of your business and you get accurate profit and loss reporting and it can help you to identify trends in your cash flow.

With regards to reporting, if you have a full time person looking after your reports, you should be having a weekly meeting with them to review reports. To make this process easy for you, refer to the 'Essential Financial Management Templates' workbook which you can purchase from our website. This workbook has a standard financial meeting agenda that will help you to guide your meeting so that it's both effective and efficient.

When you are meeting with your accounts person, you want to ensure that you have all the reports up front -before your meeting – so that you have time to go through them and highlight any discrepancies that you can then address during the meeting.

YOUR WEEKLY REPORT PACK
So what information do you need to know if your business is doing well or not? Well your weekly report pack should consist of the following five reports (by the way, a sample copy of each of these reports is also included in the workbook that I mentioned before):

1) A Profit and Loss – this should be provided weekly (if you're meeting weekly) as well as a Month to Date and a Year to Date report. So that's actually three reports in total!

2) From there, you would request a copy of your Aged Payables. This report shows a list of all the people that you owe money to, and when it's due – or if its overdue. If there are any amounts that exceed your suppliers trading terms, you want to know why. If it's because of cash flow, you then look at your cash flow analysis report to see when they will be paid. To maintain a great relationship with your supplier, you then need to communicate this with them.

3) Another essential report is your Aged Receivables. This is where you can clearly see who owes you money and if they have any amounts outstanding to you. This allows you to follow up on collections way before it becomes overdue. As part of your financial management systems, you should have a standard follow up system. For example – if a client has exceeded their trading terms by 7 days, what happens – do you follow up with a quick phone call to check that they've received the invoice. If its 14 days – what happens – and so on.

If you refer to the 'Essential Financial Management Templates' workbook that I mentioned before, there's also a list of demand letters designed to help you when you need to be a little more serious about collecting. But once again, Aged Receivables is essential because you need to see when your money is coming in – so that you can pay your suppliers and employees their wages without having to dip into your own personal cash reserves.

4) This brings me to the next report – a Cash flow analysis. This report should be put together by your bookkeeper and outlines when money is coming in and when it is going out. You can then see if there are any shortfalls so that you can make plans in advance to get this covered. It may be that you need to transfer monies from another account – or it may be that you chase outstanding payments. What you do not want is to find out when you go to transfer the money is that there's nothing in the account!

Believe it or not, this is often the most under-utilized financial report – and yet it's the most important. You would not believe how many bookkeepers or accounts people do not do them either. It's not so much that it's difficult to produce, but it's a working document which means that it needs to be regularly updated. But persist with this one, even if your accounts people try a mini revolt over it, because it's a life saver for your business.

The 'Essential Financial Management Templates' workbook that I referred to previously that's found on our website contains a fantastic cash flow analysis report that will save you and your team a lot of time.

5) The other essential report to have is the Bank Reconciliation. If your bookkeeper is full time, then they can do this weekly by using the online reports from your bank. If its monthly, then they will need to wait for the bank statement to arrive from the bank before they can finalise. However, keep on top of them for this – this report shows that the necessary process has been done to ensure that the month end has been closed off and that the cash in bank and any other payments or receipts are accounted for. Basically a bank reconciliation is done so that its guaranteed that your amounts coming into and out of your bank account are accurately reflected in your accounting software package.

WORKING WITH YOUR ACCOUNTANT
I would also recommend requesting that your financial controller automatically sends a copy of your monthly reports to your accountant. This way your accountant can see where you're headed from month to month. Depending on the size of your business, you could then establish regular meetings with your accountant – whether it's monthly or quarterly – to discuss those reports and your financial plans for the coming month.

Once you are receiving these reports regularly, you will find that you become much more empowered in your business and your finger is never far from the pulse!

Production Linearity – Eliminating the “Hockey Stick Syndrome”

Why is linear production so important? It's simple; "It's where the money is!" Scrap, rework, overtime and poor quality are all non-value-added costs that increased as a function of the famous "Hockey Stick Syndrome". That is, as we delay our production schedule completions toward the end of the month (or worse, to the end of the financial quarter), there is a tremendous pressure put on Manufacturing that produces shop floor chaos that generates significant non-value-added cost. We usually end up making the production plan and financial forecast because the "Knights in shining armor" come through with a last minute, heroic performance. But, at what cost? Some companies actually give up 10 to 20% of their potential profit margins because they have developed and fostered a manufacturing team that perpetuates the "Hockey Stick Syndrome".

Companies that continue to live with the end-of-the-quarter "push" will never achieve their full growth and profit potentials. How do you smooth schedules and achieve linear production? The challenge is in how to keep daily pressure on the critical path of schedule achievement. We need to have the visibility of all critical tasks and milestones from day one of the quarter and create team awareness and commitment to their timely achievement. Our manufacturing team must become sensitive and proactive in the execution of early production planning details and they must learn to apply their creativity and energy in a linear style. To be sure, up front planning and execution can yield amazing manufacturing results and lead to profitability beyond expectations.

The most effective production manager I've ever known used a huge magnetic board to schedule production planning details and monitor production linearity. An early focus on details, corrective actions and recovery planning was his management style. He would hold early morning meetings every day to status yesterday's progress on the magnetic board and to establish the daily challenges. He was an expert at team dynamics and his people always new what they had to do and they were always provided the tools to get the job done. The combination of the magnetic board, the morning meetings and his team dynamics skills made this production manger an effective leader and an expert in achieving linear production.

Today many production managers are still trying to solve their linear production problem by pursuing a sophisticated computer software solution. Most companies are now using MRPII / ERP manufacturing systems to control their production environments. These systems do not provide a focus on the detail, up front tasks and milestones that are critical to linear production and consequently have not presented a solution to the "Hockey Stick Syndrome". On the other hand, using an old magnetic board in this day and age of computer sophistication may not be an acceptable alternative. A good trade-off might be to develop a simple computer spread sheet specially designed to plan critical production milestones and to measure / monitor production linearity.

Using this daily schedule as the "bible", the next step would be to retrain the "Knights in shining armor" to gradually shift their manufacturing paradigm from end-of-the-quarter "fire fighting" to daily proactive problem solving.

Finally, it is important to differentiate between shipment linearity and production linearity. In a widget, make-to-shelf manufacturing company that build substantial finish goods inventory and in highly engineered capitol equipment manufacturing companies the two linearity measurements will not be equal.

Shipment linearity may be more of a function of Sales' bookings and customer's preference rather than nonlinear production. Consequently, the measure of production linearity must be developed to measure the performance of the manufacturing process and not be influenced by Sales bookings or customer related shipment delays.

Importance of Acquiring Knowledge in Business

Knowledge is a resource referred to as knowledge capital or intellectual capital in a business. It is the essential element that allows businesses to operate in the market sector. The knowledge of the organization is within the human capital of the organization. Despite the rapid global changes, knowledge addresses key issues that can lead to successful management within organizations and can be used as leverage in collective bargaining of existing knowledge and creating new ones.

Understanding customers' needs and the business environment is a huge interface of information. If a market research is done, then the knowledge of the market can be integrated to the target clients specifically in developing new products / services and improving existing ones.

Having knowledgeable staff sets the business on a competitive edge because it helps the business run more smoothly and efficiently. For example, knowing customers' needs and feedback to develop products or services to ensure that their needs are met.

Moreover, monitoring and reporting the changes in the business world is also needed. Knowledge in building networks by professional associations and trading partners can provide an easy way to find out what the competitors are doing and to see the latest innovations in the market sector. Making product research and development is a vital source of knowledge that can help in retaining competitive edge.

Furthermore, using knowledge more effectively can improve goods / services offered. You can increase customer satisfaction. Knowledge of the market can result better awareness of what customers want and what the staff require. Knowledge or information sharing can also improve staff productivity.

In order to manage the utilization of knowledge, there is a need to build a culture in which knowledge is valued across the business to retain the competitive advantage and understand the characteristics of the target market.

Knowledge of the business can help entrepreneurs evaluate and understand the needs of potential customers and develop products / services that meet customer satisfaction since possible customers show different behavior patterns and preferences such as brand loyalty and the like.

Through knowledge acquisition, business supply chain management is visible everywhere and anywhere. It leads to faster growth and development. It also impacts the competitive advantage and become strategically important to understand knowledge transfer in a more predetermined fashion. The sustainability of organization depends largely on the acquisition of knowledge with a continuous learning process.

Hence, knowledge is vital to any organization because it empowers entrepreneurs to take informed decisions, improve services, produce better marketing decisions and increase profitability.

Oracle Production Scheduling Vs Manufacturing Scheduling

After Oracle's acquisition of JD Edwards in 2006, Oracle has been promoting the best-in-class Production Scheduling (PS) software for all the obvious reasons. While more and more customers are adopting Oracle Production Scheduling to remove bottlenecks and improve performance on the shop floor, some manufacturing companies are still wondering why they should switch from Oracle's Old Manufacturing Scheduling to Production Scheduling?

Here are the main reasons:

· Oracle PS is a versatile application that can be stand-alone or integrated with Manufacturing Planning and Execution Systems as opposed to Manufacturing Scheduling which mainly works in conjunction with the manufacturing execution system – Work in Process (WIP). With Production Scheduling's close loop integration with Advanced Supply Chain Planning (ASCP), shop floor jobs can be best scheduled to both optimize resource planning and maximize service levels.

· Oracle PS with its powerful Key Performance Indicators (KPI) can be used as a tool to ensure that the scheduling scenario is meeting the corporate end objectives. Comparison of different schedule scenarios are instantly displayed in the Oracle Production Scheduling KPIs with Service Level, Inventory, Resource and Manufacturing utilization details. This makes decision analysis rather effortless. Many savvy schedulers using Oracle Manufacturing Scheduling had long wished for such powerful functionality.

· Oracle Production Scheduling can automatically detect resource floating bottlenecks as they move within a schedule. This understanding helps PS Solver deploy the most appropriate

Scheduling strategy to maximize the throughput and optimize the resource utilization.

On the other hand, resolving the bottleneck required a lot of constant tuning of the rules in the older Oracle Manufacturing Scheduling.

· Production Scheduling provides a number of views which can provide users with powerful analysis to support their decision making. Some of these views and user interfaces are:

o Production Pegging (Supply / Demand pegging with easy to drill down alert and root causes)

o Resource and Operations Gantt

o Resource and Item Graph

o Resource Gantt and Multi-Capacity Resource Graph

o Operations Editor and Graphical Routings

o Change over Editor

· Performance: Oracle PS uses smarter technology for constraint directed search which achieves the advantages of constraint-based scheduling with much better performance over traditional tools like Oracle Manufacturing Scheduling. This is another reason Production Scheduling becomes a tool of choice when production volume or production constraints are higher.

· Oracle PS is much simpler to setup yet delivers powerful scheduling strategies to optimize production without much trial and error. This reduces the total cost of ownership.

CONCLUSION

Oracle Production Scheduling is truly the best of breed next generation software which provides huge advantages over Oracle's past Manufacturing scheduling tool. There are a number of additional PS capabilities (not covered in this short blog) that if implemented well, can make scheduling really productive.

What Is Turnkey Manufacturing And Why Is It Better?

In this highly globalized and competitive world, there is a constant need to improve the performances and delivery on time so that the company's development is ensured. Most businesses which deal in manufactures prefer to implement this by reducing the costs through various mean including sending the assignments overseas. This is a popular option when the products that are being manufactured will be sold in an international market. However, at times when the resources are not enough to use overseas manufacturing facilities, a very attractive option that the companies have is the turnkey manufacturing. Turnkey manufacturing is the process of manufacturing products at a place that is closer to home as it saves money and time.

Turnkey manufacturing has been a very viable option for companies who do not have enough resources to send their work abroad. Though the labour outside is cheaper, it does not help the company save much, as the costs of other factors increase to a great level. These factors include the customs, the tax and the duties, extra fees charged by the international representatives and the ones that are in the country where the item is being manufactured, acquiring licenses, and cost of transportation, inter-modal handling and other less important expenditures. To avoid the extra strain on the resources that the company has, turnkey manufacturing proves to be a great solution as all of these expenditures are not present.

Another great advantage about the turnkey manufacturing is that it is implemented very quickly and saves a lot of time for the company. There are a number of companies that provide turnkey services and they have offices placed very strategically around the world to facilitate the process. It not just saves time, but it also provides the companies a complete manufacturing set up which includes providing supply chain services as well as manufacturing assignments. These services include assembly line production, acquisition of the materials required, testing the manufactured objects and ensuring they are at an optimal level, and providing after market services and also providing the very important warranty support. All these features make turnkey manufacturing, a very popular and sought-after form of production. Some of the companies which provide this service also deal in giving their clients the product design services. There are a few companies which use this model of manufacturing right from the beginning, as their company is dependent on innovative products rather than the ones that are infrastructure-intensive.

Above all this, turnkey manufacturing also helps the companies in avoiding risk and keeping a low overhead. There are a number of risks involved in sending the work overseas. These include physical risks, intangible currency problems and variations in the exchange-rate. Other problems are the ones pertaining to the inefficient management control that could lead to heavy losses, and loss of intellectual property. All these risks might sound small but can be very damaging for the company's progress. Turnkey manufacturing lowers down these risks considerably, proving to be a better option of manufacturing. Above all this, the two great advantages of this type of manufacturing are: 1) Increased ability to meet the market demands by moving quickly. 2) The ability to use all the latest technological innovations without having any sort of high expenditure. These advantages and low-risk features make turnkey solutions an important service.

Athens Greece Horses and Social Status

Since earliest times all over the Mediterranean, the horse has been a symbol of prestige, wealth, and status. Social rank has often been defined in terms of one’s ability to own and maintain a horse: the hippeis in Greece, the equites in Rome, or the chevaliers of Medieval Europe. The word in English, “knights,” carries the same meaning.

In the Agora the earliest evidence for the association of horsemanship and high social status is found in the burials of the Iron Age cemetery which underlies the later civic center. The first is a tomb of the 9th century B.C., with rich grave goods in the form of pottery and an iron sword-in a period when such metal was still rare. The burial was a cremation, and found among the ashes of the pyre and the urn for the bones were two iron snaffle bits from the bridle of a horse.

In the 8th century B.C. many of the graves contained elaborately painted cosmetic boxes (pyxides) bearing lids with handles in the form of one to four horses. In Athenian society of the early 6th century B.C., the second-highest property classification was a group known as the knights (hippeis). Thus it now seems clear from the grave goods in these early burials that our recognition of the horse as a token of high social and political status should be pushed back several centuries, to the 9th or 8th century B.C.

Throughout the 6th century B.C. Athens was ruled by several large aristocratic families who took pride in their nobility. One expression of that pride was the association of one’s name with horses, and several prominent Athenians had names starting or ending with the word hippos. Perhaps the earliest example is Hippothoon, one of the ten eponymous heroes of Athens and the son of Poseidon. The two sons of the tyrant Peisistratos were named Hippias and Hipparchos, and the father of Perikles himself bore the name Xanthippos.

These old aristocratic families do not disappear with the advent of democracy at the end of the 6th century, and the association with horses in Athenian nomenclature continues well into the Classical period. There are literally hundreds of late examples of equine names. In his play The Clouds (423 B. C.), Aristophanes clearly and specifically addresses the deliberate use of some form of the word for horse in a personal name as an indicator of aristocratic pretensions and breeding. He paints thereby a telling picture of the tensions between aristocrat and commoner in democratic Athens. Strepsiades opens the play with a discussion of his marriage and the birth of his son, Pheidippides:

Curses on the go-between who made me marry your mother! I lived so happily in the country, a commonplace, everyday life, but a good and easy one-had not a trouble, not a care, was rich in bees, in sheep, and in olives. Then indeed I had to marry the niece of Megakles, the son of Megakles; I belonged to the country, she was from the town; she was a haughty, extravagant woman, a true Coesyra. On the nuptial day, when I lay beside her, I was reeking with the dregs of the wine-cup, of cheese, and of wool; she was redolent with essences, saffron, voluptuous kisses, the love of spending, of good cheer and wanton delights.

Later, when we had this boy, what was to be his name? It was the cause of much quarreling with my loving wife. She insisted on having some reference to a horse in his name, that he should be called Xanthippos, Charippos, or Kallippides. I wanted to name him Philonides after his grandfather. We disputed long and finally agreed on Pheidippides…. She used to fondle and coax him, saying, “Oh, what a joy it will be to me when you have grown up, to see you in your chariot driving your steeds toward the town.” And I would say to him, “When like your father, you will go, dressed in a skin, to fetch back your goats from Phelleus.” Alas! He never listened to me and his madness for horses has shattered my fortune.

This same class distinction, actually defined by horses, is found in a speech of Lysias. The defendant, claiming a cripple’s pension, must show that his use of a borrowed horse is necessary and not an expression of wealth or a claim to prestige: But the strongest proof, gentlemen, of the fact that I mount horses because of my misfortune and not from insolence, as this man alleges, is this: if I were a man of means, I should ride on a saddled mule, and would not mount other men’s horses. But in fact, as I am unable to acquire anything of the sort, I am compelled, now and again, to use other men’s horses.

Depletion of Forest Resources

INTRODUCTION

Echo systems around the world help sustain life for millions of species. Echo systems that are mainly forests provide a home for a large majority of the species alive. Therefore the trees in these forests are considered to be the most important species. Although it is true, that most species are not able to sustain without each other.

There are many benefits that we get from our forests. Some of these include cleaner drinking water, a home for plants and animals, economic growth, clean air, recreational opportunities, reassuring future. Another benefit we get from trees is called oxygen. If there were no trees to give us oxygen to breath, we would not be able to live. So if you need one good reason why a forest should exist, staying alive is a pretty good reason.

CAUSES OF THE PROBLEM

Forests have many resources that people can use to raise their living standards. One example is the wood for building houses. Certain wood materials last a long time, they keep the house warm and make it easy to manufacture homes. Unfortunately the world is overpopulating and the demand for a higher standard of living is constantly on the rise. Therefore the demand for more resources is growing to levels that can not be sustained. Since forests provide a large portion of the world's resources, many forests are cut down or burned.

The cause for cutting down forests is directly associated with the high demand for wood to manufacture paper products and lumber for other manufacturing. We practically use wood for everything. It is used in home building, marine products, furniture and the list seems like it's endless. Just look around yourself right now and chances are you will find a product within your reach that is made of wood. Not only is wood a good building material, but it also has great aesthetic qualities. Most people appreciate a nice wooden dining table set or classic wooden rails on a staircase. Unfortunately we do not always take in to account how many trees need to be cut down so we can have these luxuries in our lives.

Another major direct cause for forest depletion is simply burning forests for farmland. This is more common with countries that are undeveloped and have tropical rainforests. Many poor farmers in these countries burn or cut small portions of tropical forests so they can have room for farming and cattle. But the big scale problem is created when huge corporate farms burn thousands of square acres a year. They need this much room so they can provide farming on a much larger scale to compete in the world market for food. The reason forests are burned for the farmland is due to the rich minerals fertility of the soil.

Unfortunately even the large scale farmers in undeveloped countries are not educated on how they can maximize their results when reusing the soil. Therefore the soil is used up and left as a desert while the farmers burn more forest to make another farm. The Amazon rainforest which is the largest in the world has fallen victim to such deforestations. This forest is located in South America where countries are having tough financial times. Brazil's market is a third of all the Latin countries included. Yet "Brazil's foreign debt, except in the most implausible of positive economic circumstances, is simply unsustainable in the years ahead" (CRF.org 2002). Economical pressure on a country is another big cause that will force a country to deforestation such as the case in Brazil. Basic Science and Remote Sensing Initiative (BSRSI) show data that between 1978 to 1988 230,000 square miles, nearly the size of Texas was affected by deforestation (bsrsi.msu.edu). That is 16.5% of the whole rainforest in the Amazon.

The next example shows the cause of deforestation for farming. According to The Center for International Forestry Research (CIFOR), "Between 1990 and 2001 the percentage of Europe's processed meat imports that came from Brazil rose from 40 to 74 percent" and by 2003 "For the first time ever, the growth in Brazilian cattle production-80 percent of which was in the Amazon-was largely export driven. " As more roads are built to provide access to forests in undeveloped countries more deforestation is evident.

EXTENT OF THE PROBLEM

As mentioned earlier, we get a large portion of our oxygen from vegetation such as trees. Since most trees live in forests it is important to realize the negative impact deforestation may have on our air quality. Carbon dioxide (CO2) is a gas that has an impact on the greenhouse effect. There is a cycle between CO2 producers such as cars and CO2 consumers such as plants. Together they create the "Global Carbon Cycle". The plants and soil of tropical forests hold 460-575 billion metric tons of carbon worldwide (McKane et al. 1995). From 1850 to 1990, deforestation worldwide released 122 billion metric tons of carbon into the atmosphere, with the current rate being between 1.6 billion metric tons per year (Skole et al. 1998). In comparison, all of the fossil fuels (coal, oil, and gas) burned during a year release about 6 billion tons per year. Therefore deforestation even when compared to all the other pollution plays a significant role in Global Warming and clean air.

Another extent of the problem with deforestation is a decrease in biodiversity. Biodiversity is important for Ecosystem sustainability, agriculture, medicine, recreation, aesthetic and commercial value. There are about 5 to 80 million species that live on this earth (Lawton and May 1995). Tropical rainforests cover about 7% of the world, but are home to more than half of the species living in the world. After a forest is cut down, many species can not live without it and possibly go extinct. Since we depend on these species for many resources, their extension will rob us of their benefits. Perhaps we might destroy the next cure for AIDS by deforestation and not know it.

FUTURE

The negative impacts of deforestation are getting noticed internationally. Many countries are taking steps to reduce the problem for a more sustainable earth. Unfortunately financial gain and high competition still exists with deforestation, and for some it's the only way of survival. Many people are not educated about the long term results their actions may cause. Because of these reasons deforestation is still a reality around the world in many countries.

With more international involvement, countries will take effective steps to bring deforestation to sustainable levels. But there is still a great deal of work to be done. For some forests it is still not too late to bring them back quicker. Other forests that have been clear-cut might take centuries to grow to the original state. Areas where pesticides were used it is possible that the echo system was damaged and may take a long time to grow again. Many forests were replaced by large banana plantations. These plantations use pesticides that kill many species that are vital for an echo system to sustain. Erosion caused by deforestation may bring more water pollution in the future and may affect agriculture in the area. Other reasons for deforestation are simply to provide room for paved roads, residential and commercial development that are caused by urban sprawl. These types of developments permanently destroy forests. Deforestation is a serious threat to life's future on our planet. It has major effects on our global climate. It leads to the loss of millions of species that are important in sustaining a living earth.

SOLUTIONS

As we discussed the causes for deforestation, we realize how these causes are very different. Because the causes are often controlled by a countries economy, overpopulation and many other social reasons, it is impossible to find one solution to deforestation. Although there are many solutions, it will take time and cooperation of many different groups of people and organizations to make the solutions work.

One popular solution that has been in effect for a few decades is forest conservation. We can work internationally, regionally, and locally with organizations to develop policy and influence industries to help ensure a sustainable future for forests. Conservation helps protect, manage, and restore the world's most important forests by identifying threats and developing solutions to them.

Decrease the amount of products that are made as a result of deforestation. For example, using materials other than wood to build homes, furniture and other common products made of wood. Encourage recyclable materials so people do not go back to wood again. Switching from wood to other materials will decrease the demand / supply for wood.

Implement more efficient farming methods to encourage the reuse of land.

Educate people around the world about the negative impacts of deforestation, and what can be done to prevent it. Help finance more educational programs. Help countries make the right economic decisions.

Sign international treaties and make laws / regulations to control annual deforestation.

Import meat and dairy products from markets that do not cause deforestation.

The solution that I believe will be very effective is the second one. As far as cutting down trees, this is a very workable solution. We have too many products that are made of wood today. As economies grow around the world, the middle class will also grow. This middle class will demand more and more products that are made of wood. The American middle class is obsessed with wood products and we do not even realize it. A large portion of our homes are built from wood, and so is our furniture. Most cabinets alone require so much wood. If we like wood products so will the rest of the world.

The solution is to take the majority of the wood products and find alternative materials to them. This of course is not as easy as it sounds, but it is very doable. Once it is done, it will extremely decrease the demand for wood, therefore reducing deforestation. With such high advances in technology we can travel in space and replace hearts. Therefore it is possible to make materials that are safe for the environment and replace wood. Maybe even make materials that share most of the properties that wood has. We can even invent materials that imitate wood like the "burled wood" in our cars today. This "burled wood" in most cars is not even wood anymore, it is some kind of a plastic and a pattern to imitate the look of the wood. Speaking of the auto industry, I can not believe how advanced our cars have become. These are cars that we drive everyday. Yet we live in new houses that were built with an ancient method of wood and nails. I think that is ridiculous. Perhaps the solution to replace wood with alternative materials will also lead to more efficient assembly methods and a safer environment. And most importantly the first solution is changing our attitude to help prevent deforestation.

The Depletion of Forest Resources is a huge problem with challenging solutions, let us work as a team around the world to help solve these issues.

The Importance of a Balance Sheet

An individual has two primary tools for managing personal finances. The Personal Balance Sheet is ignored and the Budget is the darling of Financial Consultants and the media. The key to understanding personal finances is that you have to understand your Budget and Balance Sheet individually and also how they work in combination to give you a complete snapshot of your personal finances.

Your balance sheet is extremely important because it shows you where the gold is. It is your personal Fort Knox. It is also extremely important because you need to have a stash of gold in your personal financial picture. The gold in your Balance Sheet is not the Assets. They are the positive side of your Balance Sheet but the real picture of how much gold you have in your Fort Knox is your Net Worth. So just as important to your Balance sheet is your Liabilities. The total of your Liabilities is subtracted from the total of your Assets to give you your Net Worth.

You fill out your Balance Sheet and total up your Assets and Liabilities. You subtract the total of your Liabilities from your Assets. That number, your Net Worth will come out to either a negative amount, an amount of or near to zero, or it will be substantially positive. These are the only 3 scenarios possible.

• If your net worth is a minus number, you are not managing your financial resources properly. Your Balance sheet is your report card and you are failing. It is that simple. If you are managing your money to deal with life's challenges and planning your personal finances with your retirement in mind, your Net Worth should be positive and growing. If your Net Worth is positive, you can ride out financial storms like the current situation. At the time of your retirement, your Net Worth must be substantially positive so that you will be able to keep costs down and have investment income to replace your working income. During your working years, your Net Worth should be growing steadily because a retirement nest egg does not grow without years of nurturing.

• There are circumstances where it is acceptable to have a Net Worth of Zero or near Zero. The first is when you are just starting out. It just makes sense that it would be zero. You may have student loans but that is offset by some form of education that will allow you to make more money in the course of your lifetime. The key is that this is the best time to start building your net worth. It allows the principal of compounding value to work its magic on your assets for decades. That saves you a lot of work later in life. However, most of us are not that wise and we find ourselves in our 30s and 40s with little or no Net Worth. This means you have less time for compounding to work. So you have to work harder and especially manage your money smarter to prepare for the financial challenges you face going forward. The nice thing is that you have probably made some mistakes that have made you much wiser. You should be able to recover much faster than you would have in your undisciplined youth.

• If you have a positive net worth that means that you are building assets. Just as important is that you are controlling your debt. This is the key that has probably gotten you to this situation. The key to a positive Balance Sheet is that debt offsets the value of your assets when you look at your personal finances as a complete picture so your debt / equity ratio should be less than one and get smaller and smaller. Debt servicing saps cash flow on your budget that could be used to build assets that can be used to produce income in your retirement years. Clear title ownership of assets such as your home reduce cash draw and this is incredibly important as you approach retirement.

The financial crisis we are in now is described as a Balance Sheet crisis. We are in this crisis because nobody was paying attention to their Balance Sheets, not even at the towering heights of our financial infrastructure. The symptoms were everywhere. The while researching the I found That the top sites on the internet for Balance Sheet are On Those WHO COMPLETE want to sell you something so they 're That can gain access to any Assets on your balance sheet That Might be left after this disaster. Before the disaster, the only thing that had any importance was whether a potential buyer of anything could afford to make the payments on whatever he was buying assuming he made 120% of his stated income. The most outrageous symptom was that people would take appreciating home equity and borrow against it to buy depreciating assets and consumer goods. They overbooked their budgets and now they have gutted their balance sheet.

The resulting loss of home values ​​is the disaster we have now where people have either a zero or minus Net Worth. The other aspect is that we are now wiser. For the good of our society and our financial infrastructure we had better be. Going forward we must pay attention to our Balance Sheets and recognize that is where the gold is. You must save and protect your gold. Net Worth is where financial power is and that is the Importance of a Balance Sheet.

Characteristics of Modern Media Technology

Media has evolved a lot. Modern media depends on Technology to send information or gather them at a faster speed. The following are the characteristics:

Speed: The information reaches at a faster speed.

Reach: The information must have mass reach.

Preventing Calamities: Modern media broadcasts 24 hours. So high technology is used to beat natural calamities.

Constant Transmission: Technology is used for constant transmission.

The following tools of technology is used to achieve the aforesaid targets:

Use of Satellites: Satellite Technology is used to ensure constant transmission. A satellite hardly gets affected by climatic conditions.

Use of Video Conferencing: It is used to get live and personalized feedback without physical presence.

Use of Television Conferencing: It is used to get audio inputs from far off places.

Use of Internet: Internet is being relied upon for information.

Use of high end Computer Technology: Computing and high speed processors are used for fast and able data processing.

Use of Mobile Satellite Vans for News Coverage: Satellite vans are used for high mobility and anytime coverage.

Use of high end Audio visual equipments: Use of high end audio visual equipments have emerged that leads to clear sound and picture. Tape recorders and high end video cameras are used by media persons to take interviews fast and transmit news ina proper and efficient manner.

Thus these are the characteristics of Modern Media Technology that has made media more fast, accurate and improved and has made it an indispensable tool for protecting the largest democracy of the world named India by making it more transparent and accountable to people. Hence these are the characteristics of modern media technology.